Detailed Product Guides
301 Full Hard Fatigue Resistant Stainless Steel Product Guide
301 Full Hard Shim Stock is an austenitic stainless steel with a composition of 17% chromium and 7% nickel. Its combination of hardness and toughness, resistance to atmosphere corrosion and its bright surface finish make it an excellent choice for anything from aerospace applications to decorative structural components. 301 Full Hard Stainless Steel is resistant to fatigue and a variety of corrosive media. However, the corrosion properties are not as good as 302/304 (18-8 chromium-nickel) stainless steel. Its susceptibility to carbide precipitation during welding restricts its use in some applications.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Aerospace
- Kitchen equipment
- Automotive/Marine components
- Conveyor belts
- Springs
301 Full Hard Fatigue Resistant Stainless Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 40 min. (ref. only) Specifications ASTM A 666
AMS 5519Tensile Strength 185 KSI min. Yield Strength 140 KSI min. Elongation (% in 2 in.) 8% min. for < .015
9% min. for .015” – .031”
Surface Finish 2 TR RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Full Hard Mn 2 max C 0.15 max P 0.040 max S 0.03 max Si 1 max Cr 16 – 18 Ni 6 – 8 Grain Size (RTF in mm) NA N 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015 ± 0001 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
301 Half Hard Fatigue Resistant Stainless Steel Product Guide
301 Half Hard Shim Stock is an austenitic stainless steel with a composition of 17% chromium and 7% nickel. Its combination of hardness and toughness, resistance to atmosphere corrosion and its bright surface finish make it an excellent choice for anything from aerospace applications to decorative structural components. 301 Half Hard Stainless Steel is resistant to fatigue and a variety of corrosive media. However, the corrosion properties are not as good as 302/304 (18-8 chromium-nickel) stainless steel. Its susceptibility to carbide precipitation during welding restricts its use in some applications.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Aerospace
- Kitchen equipment
- Automotive/Marine components
- Conveyor belts
- Springs
301 Half Hard Fatigue Resistant Stainless Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Half Hard Hardness RC 32 min. (ref. only) Specifications ASTM A666
AMS 551 8N (EXC for <.005″)Tensile Strength 150 KSI min. Yield Strength 110 KSI min. Elongation (% in 2 in.) 15% min. for < .015
18% min. for >.015
Surface Finish 2 TR RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Half Hard Mn 2 max C 0.15 max P 0.040 max S 0.030 max Si 1 max Cr 16 – 18 Ni 6 – 8 Grain Size (RTF in mm) NA N 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015 ± 0001 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
302/304 Full Hard Stainless Steel Shim Stock Product Guide
302/304 Full Hard Stainless Steel is an 18% chromium and 8% nickel austenitic alloy. The most familiar and used alloy in the stainless steel family. This represents an excellent combination of corrosion resistance and ease of fabrication because of some of the important properties, i.e. high strength with low weight, resistance to oxidation, ease of cleaning, the beauty of appearance, prevention of product contamination, good strength and toughness at cryogenic temperatures.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Medical devices
- Aerospace
- Food and beverage equipment
- Sanitary and cryogenic applications
- Pressure vessels
302/304 Full Hard Stainless Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 40 min. (ref. only) Specifications ASTM A 666 (302)
AMS 5906 (302)
AMS 5913 (304)Tensile Strength 185 KSI min. Yield Strength 140 KSI min. Elongation (% in 2 in.) 3% min. Surface Finish 2 TR RA (um) 4 to 15 Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Mn 2 max C 0.08 max P 0.04 max S 0.03 max Si 0.75 max Cr 17 – 19 Ni 8 – 10 N 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015 ± 0001 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
316 Full Hard Stainless Steel Shim Stock Product Guide
316 Full Hard stainless steel is more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels. This alloy offers higher creep, stress-to-rupture and tensile strength at elevated temperatures. These alloys are also excellent for fabrication, which are typical of the austenitic stainless steels.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Oil/Petroleum Equipment
- Food preparation and storage
- Brewery and other beverage industries
- Pharmaceutical and Bioprocessing industries
- Marine Equipment
- Architecture
316 Full Hard Stainless Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 40 min. (ref. only) Specifications ASTM A 666 Chem. Only
ASTM A 240 Chem. Only
AMS 5524 Chem. Only
AMS 5507 Chem. OnlyTensile Strength 175 KSI min. Yield Strength 140 KSI min. Elongation (% in 2 in.) 2% Surface Finish 2 TR RA (um) 4 – 12 Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.08 max Cr 16 min / 18 max Fe Balance Mn 2 max Mo 2 min / 3 max Ni 10 min / 14 max P 0.040 max S 0.03 max Si 1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015± ± 00007 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
316/316L Annealed Stainless Steel Shim Stock Product Guide
316/316L Annealed Stainless Steel is an austenitic chromium-nickel stainless steel containing molybdenum which increases general corrosion resistance, improves resistance to pitting from chloride ion solutions, and provides increased strength at elevated temperatures. This austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. Properties are similar to those of Type 304 except that this alloy is somewhat stronger at elevated temperatures. Corrosion resistance is improved, particularly against sulfuric, hydrochloric, acetic, formic, and tartaric acids; acid sulfates, and alkaline chlorides. Type 316L is an extra-low carbon version of Type 316 that minimizes harmful carbide precipitation due to welding assuring optimum corrosion resistance.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Exhaust manifolds
- Heat exchangers
- Pharmaceutical and photographic equipment
- Chemical equipment
- Parts exposed to marine atmospheres.
316/316L Annealed Stainless Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Annealed Hardness 95 HRB max. (ref. only) Specifications ASTM A 666
ASTM A 240
AMS 5524
AMS 5507Tensile Strength 75 – 100 KSI Yield Strength 30 KSI min. Elongation (% in 2 in.) 40 % min. for < .025”
45 % min. for > .025”Surface Finish BA finish (Bright Annealed) RA (um) 4 – 10 Grain Size (RTF in mm) 7 min. RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.03 max Cr 16 min / 18 max Fe Balance Mn 2 max Mo 2 min / 3 max Ni 10 min / 14 max P 0.04 max S 0.03 max Si 1 max Cu 0.75 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015 ± 00007 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
17-4 PH Annealed Stainless Steel Shim Stock Product Guide
17-4 PH (Precipitation Hardening) stainless steel is an alloy with excellent fatigue properties, corrosion resistance and formability while providing high strength and hardness. Upon heat treating this alloy will have minimal distortion. The corrosion resistance of 17-4 alloy is superior to that of the hardenable 400 series stainless steel. In high-heat treated conditions, 17-4 PH stainless steel possesses excellent mechanical properties at temperatures up to 600° F (316ºC). This alloy is well suited for aerospace applications.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Aerospace
- Surgical Equipment
- Chemical Processing Equipment
- Food Processing Machinery
- Heat exchangers
- Power boilers
17-4 PH Annealed Stainless Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Annealed Hardness RC 38 max. (ref. only) Specifications ASTM A 693 type 630
ASTM A 480
AMS 5604Tensile Strength 185 KSI max. Yield Strength 160 KSI Elongation (% in 2 in.) 3% Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.07 max Cr 15 – 17.5 Fe 73 Cu 3 – 5 Mn 1 max Nb 0.45 max Ni 3 – 5 Nb + Ta 0.15 – 0.45 P 0.04 max S 0.03 max Si 1 max Ta 0.45 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness Thickness Tolerance .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
430 Annealed Stainless Steel Shim Stock Product Guide
430 Annealed Stainless Steel is the most popular of all the straight chrome stainless. It is a low carbon ferritic stainless steel which, in mildly corrosive environments or atmospheric exposures, has corrosion resistance approaching that of some nickelbearing stainless steels. This alloy is oxidation resistant at elevated temperatures. 430 Annealed is ductile, does not work harden readily, and can be formed using a variety of roll forming or mild stretch bending operations as well as the more common drawing and bending processes. This Stainless Steel is also magnetic in all conditions.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Consumer Appliances
- Architectural/Construction
- Food & Beverage Processing Equipment
- Oil Refinery Equipment
- Decorative
430 Annealed Stainless Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Annealed Hardness RB 88 max. (ref. only) Specifications ASTM A 240
AMS 5503Tensile Strength 65 KSI Yield Strength 30 KSI Elongation (% in 2 in.) 22 % Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.12 max Mn 1 max P 0.04 max S 0.03 max Si 1 max Cr 16 – 18 Ni 0.5 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness Thickness Tolerance .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
309 Annealed Stainless Steel Heat Treating Foil Tool Wrap Product Guide
309 Annealed Stainless Steel Tool Wrap is used in the heat treating process to help eliminate oxide, decarburization and scale buildup on tool steel parts. Tool Wrap can be cut, folded and creased to form an air tight envelope for your part. Tool Wrap can be used in furnaces up to 2000ºF (1093ºC). Special sheet lengths and bulk quantities are also available.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Heat treating materials
309 Annealed Stainless Steel Heat Treating Foil Tool Wrap Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Annealed Hardness HRB 95 max. (ref. only) Specifications ASTM A 240 Tensile Strength 75 KSI min. Yield Strength 30 KSI min. Elongation (% in 2 in.) 40% – 99% Surface Finish BA (Bright Annealed) RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Element Percentage C 0.08 max Ni 12-15 P 0.045 max Fe Balance Cr 22 – 24 Mn 2 max Si .75 S 0.03 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/-Thickness Tolerance .002 ± 0001 Standard width tolerance for <12” = +/-.005”
Standard width tolerance for 12”-23.99” = +/-.010”
Standard width tolerance for 24”-35.99” = +/-.062”
Standard width tolerance for 36”-41” = +/-.375”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
321 Annealed Stainless Steel Heat Treating Foil Tool Wrap Product Guide
321 Annealed Stainless Steel Tool Wrap is used in the heat treating process to help eliminate oxide, decarburization and scale buildup on tool steel parts. Tool Wrap can be cut, folded and creased to form an air tight envelope for your part. Special lengths and
bulk quantities are also available. Tool Wrap can be used in furnaces up to 2000ºF (1093ºC). Special sheet lengths and bulk quantities are also available.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Heat treating materials
321 Annealed Stainless Steel Heat Treating Foil Tool Wrap Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Annealed Hardness HRB 95 max. (ref. only) Specifications ASTM A 240
AMS 5510Tensile Strength 75 KSI – 110 KSI Yield Strength 30 KSI min. Elongation (% in 2 in.) 40% – 99% Surface Finish BA (Bright Annealed) RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.08 Cr 17 – 19 Fe Balance Mn 2 max Ni 9 – 12 P 0.040 max (AMS 5510) Si 1 max S 0.03 max Ti 0.7 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance .002 ± 0001 Standard width tolerance for <12” = +/-.005”
Standard width tolerance for 12”-23.99” = +/-.010”
Standard width tolerance for 24”-35.99” = +/-.062”
Standard width tolerance for 36”-41” = +/-.375”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
302/304 Full Hard Stainless Steel Adhesive Backed Shim Stock Product Guide
Each piece has a 3M adhesive peel off backing that keeps shim in place.
302/304 Full Hard Stainless Steel is an 18% chromium and 8% nickel austenitic alloy. The most familiar and used alloy in the stainless steel family. This represents an excellent combination of corrosion resistance and ease of fabrication because of some of the important properties, i.e. high strength with low weight, resistance to oxidation, ease of cleaning, the beauty of appearance, prevention of product contamination, good strength and toughness at cryogenic temperatures.
Can’t find your material dimensions below? Click “Create Custom Cut” here or in the tab below. For “Fabrication Services” click here or above in the menu.
302/304 Full Hard Adhesive Backed Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 40 min. (ref. only) Specifications ASTM A 666 (302)
AMS 5906 (302)
AMS 5913 (304)Tensile Strength 185 KSI min. Yield Strength 140 KSI min. Elongation (% in 2 in.) 3% min. Surface Finish 2 TR RA (um) 4 to 15 Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Mn 2 max C 0.08 max P 0.04 max S 0.03 max Si 0.75 max Cr 17 – 19 Ni 8 – 10 N 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015 ± 0001 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1100 Aluminum - O - Temper Adhesive Backed Shim Stock Product Guide
Each piece has a 3M adhesive peel off backing that keeps shim in place.
Considered commercially pure, Alloy 1100 -0- Temper is 99% aluminum and is an excellent conductor of heat and electricity. 1100 -0- Temper Aluminum is ideal for applications involving intricate forming. It offers excellent corrosion resistance and is easily welded and brazed. Also it is not heat treated and nonmagnetic.
Can’t find your material dimensions below? Click “Create Custom Cut” here or in the tab below. For “Fabrication Services” click here or above in the menu.
1100 Aluminum – O – Temper Adhesive Backed Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Annealed Hardness Soft Specifications ASTM B 209 Tensile Strength 13.80 KSI Yield Strength 10.14 KSI Elongation (% in 2 in.) 33.82 % Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Cu 0.05 – 2 Al 99 min Mn 0.05 max Si + Fe 0.95 max Zn 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance .020 ± 0045 .032 ± 0045 .040 ± 0045 .050 ± 0045 .063 ± 0045 .080 ± 0045 .090 ± 0045 .125 ± 0045 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
260 Half Hard Brass Adhesive Backed Shim Stock Product Guide
Each piece has a 3M adhesive peel off backing that keeps shim in place.
Brass 260 Half Hard Shim Stock is the most ductile of the brasses and is used in greater quantity than any other copper-zinc alloy. This alloy offers low magnetic permeability and is used in applications where corrosion problems exist. Brass 260 can be blanked, stamped, or lightly drawn due to its superb forming qualities. This Brass forms a natural thin protective layer and will not corrode when exposed to the environment. Brass 260 should not be used in projects where it will come into contact with acetic acid, hydrochloric acid, nitric acid, or ammonia. Due to the high zinc contact, it shouldn’t be soldered.
Can’t find your material dimensions below? Click “Create Custom Cut” here or in the tab below. For “Fabrication Services” click here or above in the menu.
260 Half Hard Brass Adhesive Backed Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Half Hard Hardness 30T56 – 30T68 Specifications ASTM B 36 ASTM B 19 Tensile Strength 57 KSI Yield Strength 45 KSI Elongation (% in 2 in.) NA Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Zn 30 Cu 70 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 0001 .008 ± 0008 .0015 ± 00015 .009 ± 0009 .002 ± 0002 .010 ± 001 .003 ± 0003 .012 ± 0012 .004 ± 0004 .015 ± 0015 .005 ± 0005 .020 ± 002 .006 ± 0006 .025 ± 0025 .007 ± 0007 .030 ± 0030 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
300 Series Stainless Steel Slotted Shim Product Guide
Slotted Shim is manufactured from 300 series stainless steel. These Slotted Shims are used to align and level machinery and power transmission equipment such as motors and speed reducers, compressors, and pumps to eliminate excessive wear and vibration. Each shim is etched with the thickness and they are sold in kits as well as individual replacement packages.
300 Series Stainless Steel Slotted Shim Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 40 min. Specifications ASTM A 666 (302)
AMS 5906 (302)
AMS 5913 (304)Min. Tensile Strength 185 KSI Min. Yield Strength 140 KSI Elongation (% in 2 in.) NA Surface Finish 2 TR RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Mn 2 max C 0.15 max P 0.045 max S 0.03 max Si 0.75 max Cr 17 – 19 Ni 8 – 10 N 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .001 +/- ± 00008 .002 +/- ± 00001 .003 +/- ± 00015 .004 +/- ± 00002 .005 +/- ± 00025 .010 +/- ± 0005 .020 +/- ± 0005 .025 +/- ± 00075 .050 +/- ± 001 .075 +/- ± 002 .100 +/- ± 002 .125 +/- ± 0025 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
260 Brass Half Hard Shim Stock Product Guide
260 Half Hard Brass Shim Stock is the most ductile of the brasses and is used in greater quantity than any other copper-zinc alloy. This alloy offers low magnetic permeability and is used in applications where corrosion problems exist. 260 Brass can be blanked, stamped, or lightly drawn due to its superb forming qualities. This Brass forms a natural thin protective layer and will not corrode when exposed to the environment. 260 Brass should not be used in projects where it will come into contact with acetic acid, hydrochloric acid, nitric acid, or ammonia. Due to the high zinc contact, it shouldn’t be soldered.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Appliance Parts
- Ammunition Components
- Machine assembly repair and maintenance
- Tool and die set up
- Electronic Components
- Decorative furniture parts
- Fasteners
260 Half Hard Brass Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Half Hard H02 Hardness 30T56 – 30T68 (ref. only) Specifications ASTM B 36
ASTM B 19Tensile Strength 57 – 67 KSI Yield Strength 51 KSI (ref. only) Elongation (% in 2 in.) 30% nom. (ref. only) Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Zn 30 Cu 70 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .001 ± 0001 .0015 ± 00015 .002 ± 0002 .003 ± .0003 .004 ± 0004 .005 ± 0005 .006 ± 0006 .007 ± 0007 .008 ± 0008 .009 ± 0009 .010 ± 001 .012 ± 0012 .015 ± 0015 .020 ± 002 .025 ± 0025 .031 ± 0031 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
Bronze 510 (Phosphor) Spring Tempered Shim Stock Product Guide
510 Spring Tempered Phosphor Bronze is an alloy of copper that exhibits excellent strength, formability, and durability. Alloy C51000, Grade A Phosphor Bronze, H08 (spring) has a high resistance to fatigue and corrosion making it ideal for electronic connectors and spring contacts. Phosphor Bronze has excellent cold working and electrical properties as well as high formability with the added benefit of welding, brazing and soldering capabilities.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Electrical connectors
- Bushings
- Electronic, electrical, and automotive applications – connectors and spring contacts
- Electrical components, washers, gaskets, shims, fasteners, springs and bearings
Bronze 510 (Phosphor) Spring Tempered Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating H 08 Spring Temper Hardness B 99 – B 104 (ref. only) Specifications ASTM B103 Tensile Strength 95-110 KSI Yield Strength 110 KSI nom. (ref. only) Elongation (% in 2 in.) 2 % nom. (ref. only) Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Upon Request Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Cu 95 Sn 5 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerances .005 ± 0003 .008 ± 0004 .010 ± 0007 .013 ± 001 .016 ± 001 .020 ± 001 .025 ± 001 .032 ± 0015 .040 ± 002 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
Copper 110 Annealed Shim Stock Product Guide
Copper 110 Annealed is noted for its high electrical and thermal conductivity and good corrosion resistance that is easily machined and formed. 110 Copper is 99.9% pure copper with an electrical conductivity rating of 100+ % IACS. 110 Copper can be soldered with good results but is not easily welded or brazed.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Plumbing Hardware
- Wiring
- Electronics
- Decorative Hardware
- Telecommunications
- Support, leveling, fit adjustment
Copper 110 Annealed Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Soft Hardness 15T47 min. (ref only) Specifications ASTM B152 Tensile Strength 26 – 40 KSI Yield Strength 10 KSI (ref. only) Elongation (% in 2 in.) 35% nom. (ref. only) Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Upon Request Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Cu 99.9 O 0.04 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .001 ± 0001 .002 ± 0002 .003 ± 0003 .004 ± 0003 .005 ± 0003 .006 ± 0003 .007 ± 0004 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
Titanium Grade 2 Annealed Shim Stock Product Guide
Titanium Grade 2 low density and high strength-to-weight ratio makes it the material of choice for many corrosive chemical environments, including oxidizing chloride solutions (including seawater) and chlorine-based bleaches. Commercially Pure Grade 2 Titanium is the “workhorse” of the commercially pure Titanium grades. It is slightly stronger than Grade 1, but equally as corrosion resistant in a wide variety of environments.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Medical Devices
- Aerospace
- Automotive fabrication
- Cryogenic vessels
- Heat exchangers
Titanium Grade 2 Annealed Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Annealed Hardness 90 – 100 HRB (ref. only) Specifications ASTM B 265
AMS 4902Tensile Strength 50 KSI min. Yield Strength 40 – 60 KSI Elongation (% in 2 in.) 20% min. Surface Finish 2B RA (um) NA Grain Size (RTF in mm) 6 or finer RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.1 max Fe 0.3 max H 0.015 max N 0.03 max O 0.25 max Ti 99.3 min This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .005 ± 0005 .006 ± 0006 .007 ± 0007 .008 ± 0008 .010 ± 001 .012 ± 001 .015 ± 001 .020 ± 001 STANDARD WIDTH TOLERANCES +/- .005
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
Aluminum 1100 - 0 - Temper Shim Stock Product Guide
Considered commercially pure, Alloy 1100 -0- Temper is 99% aluminum and is an excellent conductor of heat and electricity. 1100 -0- Temper Aluminum is ideal for applications involving intricate forming. It offers excellent corrosion resistance and is easily welded and brazed. Also, it is not heat-treated and nonmagnetic.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Chemical Equipment
- Heat Exchanger Fins
- Sheet Metalwork
- Railroad Tank Cars
1100 – 0 – Temper Aluminum Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Annealed Hardness Soft Specifications ASTM B 209 Tensile Strength 13.80 KSI Yield Strength 10.14 KSI Elongation (% in 2 in.) 33.82 % Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Cu 0.05 – 2 Al 99 min Mn 0.05 max Si + Fe 0.95 max Zn 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance .020 ± 0045 .032 ± 0045 .040 ± 0045 .050 ± 0045 .063 ± 0045 .080 ± 0045 .090 ± 0045 .125 ± 0045 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1095 High Carbon Steel Feeler Gage Imperial Product Guide
C1095 close grain, ½” wide High Carbon Spring Steel Feeler Gage and Thickness Gage are made from the highest quality steel. 1095 offers a mix of high strength and hardness and is ground and polished to meet very precise tolerances. It also has high durability and retains its shape well.
Offered in ½” X 12” and 25 ft coils in sizes from .001 thru .040. Heavier thicknesses up to .125 are available in ½” X 12” strips. All feeler gage products have the thicknesses clearly electrochemically etched on every piece with both decimal and metric equivalent.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Aerospace
- Tool and Die
- Automotive
- Electronics
- Springs
- Edged cutting tools
1095 High Carbon Steel Feeler Gage Imperial Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened Hardness RC 48 – 62 Specifications NA Tensile Strength Range M Yield Strength NA Elongation (% in 2 in.) NA Surface Finish White Polished RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS Specialty Metals COTS-Exempt Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.9 – 1.03 Mn 0.3 – 0.5 Fe 98.38 – 98.8 P 0.04 max S 0.05 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 00008 .010 to .012 ± 00028 .0015 ± 00008 .013 to .015 ± 00031 .002 to .0025 ± 00012 .016 to .019 ± 00035 .003 to .004 ± 00016 .020 to .024 ± 00039 .005 to .007 ± 00020 .025 to .031 ± 00047 .008 to .009 ± 00024 .032 to .039 ± 00051 .040 ± 00067 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1095 High Carbon Steel Feeler Gage Sets Imperial Product Guide
TBI Imperial Feeler Gage Sets are available in 1095 high Carbon Steel, 304 Full Hard Stainless, and 260 Half Hard Brass. Our standard sets include straight blade, tapered and offset sets that are made with each size clearly etched on each piece. All sets come with a chrome wrap-around handle and knurled locking nut for ease of use. Any variation of the standard sets can be made. Also, TBI can create a custom feeler gage set to fit your specific application.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
1095 High Carbon Steel Feeler Gage Imperial Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened Hardness RC 48 – 62 Specifications NA Tensile Strength Range M Yield Strength NA Elongation (% in 2 in.) NA Surface Finish White Polished RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS Specialty Metals COTS-Exempt Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.9 – 1.03 Mn 0.3 – 0.5 Fe 98.38 – 98.8 P 0.04 max S 0.05 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 00008 .010 to .012 ± 00028 .0015 ± 00008 .013 to .015 ± 00031 .002 to .0025 ± 00012 .016 to .019 ± 00035 .003 to .004 ± 00016 .020 to .024 ± 00039 .005 to .007 ± 00020 .025 to .031 ± 00047 .008 to .009 ± 00024 .032 to .039 ± 00051 .040 ± 00067 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1095 High Carbon Steel Feeler Gage Assortments Imperial Product Guide
TBI Imperial Feeler Gage assortments are available in 1095 high Carbon Steel, 304 Full Hard Stainless, and 260 Half Hard Brass. Our ½” X 12” assortments offer a variety of thicknesses in a protective plastic sleeve. Our ½” X 6” assortments are packaged in a vinyl folding pouch with individual packets for each of the 20 different thicknesses.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
1095 High Carbon Steel Feeler Gage Assortments Imperial Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened Hardness RC 48 – 62 Specifications NA Tensile Strength Range M Yield Strength NA Elongation (% in 2 in.) NA Surface Finish White Polished RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS Specialty Metals COTS-Exempt Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.9 – 1.03 Mn 0.3 – 0.5 Fe 98.38 – 98.8 P 0.04 max S 0.05 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 00008 .010 to .012 ± 00028 .0015 ± 00008 .013 to .015 ± 00031 .002 to .0025 ± 00012 .016 to .019 ± 00035 .003 to .004 ± 00016 .020 to .024 ± 00039 .005 to .007 ± 00020 .025 to .031 ± 00047 .008 to .009 ± 00024 .032 to .039 ± 00051 .040 ± 00067 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1095 High Carbon Steel Feeler Gage Metric Product Guide
C1095 close grain, ½” wide High Carbon Spring Steel Feeler Gage and Thickness Gage are made from the highest quality steel. 1095 offers a mix of high strength and hardness and is ground and polished to meet very precise tolerances. It also has high durability and retains its shape well.
Offered in ½” X 12” and 25 ft coils in sizes from .001 thru .040. Heavier thicknesses up to .125 are available in ½” X 12” strips. All feeler gage products have the thicknesses clearly electrochemically etched on every piece with both decimal and metric equivalent.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Aerospace
- Tool and Die
- Automotive
- Electronics
- Springs
- Edged cutting tools
1095 High Carbon Steel Feeler Gage Imperial Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened Hardness RC 48 – 62 Specifications NA Tensile Strength Range M Yield Strength NA Elongation (% in 2 in.) NA Surface Finish White Polished RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS Specialty Metals COTS-Exempt Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.9 – 1.03 Mn 0.3 – 0.5 Fe 98.38 – 98.8 P 0.04 max S 0.05 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 00008 .010 to .012 ± 00028 .0015 ± 00008 .013 to .015 ± 00031 .002 to .0025 ± 00012 .016 to .019 ± 00035 .003 to .004 ± 00016 .020 to .024 ± 00039 .005 to .007 ± 00020 .025 to .031 ± 00047 .008 to .009 ± 00024 .032 to .039 ± 00051 .040 ± 00067 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1095 High Carbon Steel Feeler Gage Sets Metric Product Guide
TBI Metric Feeler Gage Sets are available in 1095 high Carbon Steel, 304 Full Hard Stainless and 260 Half Hard Brass. Our standard sets include straight blade, tapered and offset sets that are made with each size clearly etched on each piece. All sets come with a chrome wrap around handle and knurled locking nut for ease of use. Any variation of the standard sets can be made. Also TBI can create a custom feeler gage set to fit your specific application.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
1095 High Carbon Steel Feeler Gage Set Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened Hardness RC 48 – 62 Specifications NA Tensile Strength Range M Yield Strength NA Elongation (% in 2 in.) NA Surface Finish White Polished RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS Specialty Metals COTS-Exempt Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.9 – 1.03 Mn 0.3 – 0.5 Fe 98.38 – 98.8 P 0.04 max S 0.05 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 00008 .010 to .012 ± 00028 .0015 ± 00008 .013 to .015 ± 00031 .002 to .0025 ± 00012 .016 to .019 ± 00035 .003 to .004 ± 00016 .020 to .024 ± 00039 .005 to .007 ± 00020 .025 to .031 ± 00047 .008 to .009 ± 00024 .032 to .039 ± 00051 .040 ± 00067 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1095 High Carbon Steel Feeler Gage Assortments Metric Product Guide
TBI Metric Feeler Gage assortments are available in 1095 high Carbon Steel, 304 Full Hard Stainless, and 260 Half Hard Brass. Our ½” X 12” assortments offer a variety of thicknesses in a protective plastic sleeve. Our ½” X 6” assortments are packaged in a vinyl folding pouch with individual packets for each of the 20 different thicknesses.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
1095 High Carbon Steel Feeler Gage Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened Hardness RC 48 – 52 Specifications NA Tensile Strength Range M Yield Strength NA Elongation (% in 2 in.) NA Surface Finish White Polished RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.9 – 1.03 Mn 0.3 – 0.5 Fe 98.38 – 98.8 P 0.04 max S 0.05 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 00008 .010 to .012 ± 00028 .0015 ± 00012 .013 to .015 ± 00031 .002 ± 00012 .016 to .019 ± 00035 .0025 to .004 ± 00010 .020 to .024 ± 00039 .005 to .006 ± 00020 .025 to .031 ± 00047 .007 ± 00020 .032 to .039 ± 00051 .008 to .009 ± 00024 .040 ± 00067 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
304 Full Hard Stainless Feeler Gage Imperial Product Guide
304 Full Hard Stainless Steel Feeler Gage is used where the resistance to corrosive environments and outstanding wear ability are important. 304 Full Hard Stainless Steel Feeler Gage is an 18% chromium and 8% nickel austenitic alloy, the most familiar and used alloy in the stainless steel family. This alloy is also known for its ease of fabrication.
½” X 12” strips and 10 ft. coils in sizes from .0005” thru .031”. All feeler gage products have the thicknesses clearly electrochemically etched on every piece with both decimal and metric equivalent.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Power plants
- Medical devices
- Aerospace
- Nuclear facilities
- Food and beverage equipment
- Sanitary and cryogenic applications
- Marine equipment
304 Full Hard Stainless Steel Feeler Gage Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 40 Min. Specifications AMS 5913(304) Min. Tensile Strength 185 KSI Min. Yield Strength 140 KSI Elongation (% in 2 in.) 9% min. Surface Finish 2 TR RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Mn 2 max C 0.15 max P 0.045 max S 0.03 max Si 0.75 max Cr 17 – 19 Ni 8 – 10 N 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015 ± 0001 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
304 Full Hard Stainless Steel Feeler Gage Metric Product Guide
304 Full Hard Stainless Steel Feeler Gage is used where the resistance to corrosive environments and outstanding wear ability are important. 304 Full Hard Stainless Steel Feeler Gage is an 18% chromium and 8% nickel austenitic alloy, the most familiar and used alloy in the stainless steel family. This alloy is also known for its ease of fabrication.
12.7 mm X 308mm strips and 3.048 m coils in sizes from .040 mm thru .800 mm. All feeler gage products have the thicknesses clearly electrochemically etched on every piece with both decimal and metric equivalent.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Power plants
- Medical devices
- Aerospace
- Nuclear facilities
- Food and beverage equipment
- Sanitary and cryogenic applications
- Marine equipment
304 Full Hard Stainless Steel Feeler Gage Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 40 Min. Specifications ASTM A 666(302)
AMS 5906(302)
AMS 5913(304)Min. Tensile Strength 185 KSI Min. Yield Strength 140 KSI Elongation (% in 2 in.) 9% min. Surface Finish 2 TR RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Mn 2 max C 0.15 max P 0.045 max S 0.03 max Si 0.75 max Cr 17 – 19 Ni 8 – 10 N 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015 ± 0001 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
260 Half Hard Brass Feeler Gage Imperial Product Guide
260 Brass Half Hard feeler gage and thickness gage are used in non-magnetic applications or where the gage must be softer that the components being measured. Brass 260 feeler and thickness gages will not create a spark when inserted. The nonmagnetic and non-corrosive properties make its use in highly technical markets a requirement.
Offered in ½” X 12” and 10 ft. coils in sizes from .001” thru .030”. All feeler gage products have the thicknesses clearly electrochemically etched on every piece with both decimal and metric equivalent.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Computer
- Mining
- Electronics
Brass 260 Half Hard Feeler Gage Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Half Hard Hardness 30T56 – 30T68 Specifications ASTM B 36 ASTM B 19 Tensile Strength 57 KSI Yield Strength 45 KSI Elongation (% in 2 in.) NA Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Zn 30 Cu 70 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 0001 .008 ± 0008 .0015 ± 00015 .009 ± 0009 .002 ± 0002 .010 ± 001 .003 ± 0003 .012 ± 0012 .004 ± 0004 .015 ± 0015 .005 ± 0005 .020 ± 002 .006 ± 0006 .025 ± 0025 .007 ± 0007 .030 ± 0030 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
260 Half Hard Brass Feeler Gage Metric Product Guide
260 Brass Half Hard feeler gage and thickness gage are used in non-magnetic applications or where the gage must be softer that the components being measured. Brass 260 feeler and thickness gages will not create a spark when inserted. The nonmagnetic and non-corrosive properties make its use in highly technical markets a requirement.
Offered in 12.7 mm X 308 mm and 3.048 m coils in sizes from .0.0254 mm thru 0.762 mm. All feeler gage products have the thicknesses clearly electrochemically etched on every piece with both decimal and metric equivalent.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Computer
- Mining
- Electronics
Brass 260 Half Hard Feeler Gage Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Half Hard Hardness 30T56 – 30T68 Specifications ASTM B 36 ASTM B 19 Tensile Strength 57 KSI Yield Strength 45 KSI Elongation (% in 2 in.) NA Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Zn 30 Cu 70 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 0001 .008 ± 0008 .0015 ± 00015 .009 ± 0009 .002 ± 0002 .010 ± 001 .003 ± 0003 .012 ± 0012 .004 ± 0004 .015 ± 0015 .005 ± 0005 .020 ± 002 .006 ± 0006 .025 ± 0025 .007 ± 0007 .030 ± 0030 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
316 Full Hard Stainless Steel Feeler Gage Imperial Product Guide
316 Full Hard Stainless Steel Feeler Gage is used where the resistance to corrosive environments and outstanding wear ability are important. 316 Full Hard stainless steel is more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels.
½” X 12” strips and 10 ft. coils in sizes from .001” thru .031”. All feeler gage products have the sizes clearly electrochemically etched on every piece with both decimal and metric equivalent.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Oil/Petroleum Equipment
- Food preparation and storage
- Brewery and other beverage industries
- Pharmaceutical and Bioprocessing industries
- Marine Equipment
- Power plants and Nuclear facilities
316 Full Hard Stainless Steel Feeler Gage Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 40 min. (ref. only) Specifications ASTM A 666 Chem. Only
ASTM A 240 Chem. Only
AMS 5524 Chem. Only
AMS 5507 Chem. OnlyTensile Strength 175 KSI min. Yield Strength 140 KSI min. Elongation (% in 2 in.) 2 % Surface Finish 2 TR RA (um) 4 – 12 Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.08 max Cr 16 min / 18 max Fe Balance Mn 2 max Mo 2 min / 3 max Ni 10 min / 14 max P 0.040 max S 0.03 max Si 1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 00005 .001 ± 0001 .0015 ± 0001 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
260 Half Hard Brass Feeler Gage Product Guide
260 Brass Half Hard feeler gage and thickness gage are used in non-magnetic applications or where the gage must be softer that the components being measured. Brass 260 feeler and thickness gages will not create a spark when inserted. The nonmagnetic and non-corrosive properties make its use in highly technical markets a requirement.
Offered in ½” X 12” and 10 ft. coils in sizes from .001” thru .030”. All feeler gage products have the thicknesses clearly electrochemically etched on every piece with both decimal and metric equivalent.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Computer
- Mining
- Electronics
Brass 260 Half Hard Feeler Gage Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Half Hard H02 Hardness 30T56 – 30T68 (ref. only) Specifications ASTM B 36
ASTM B 19Tensile Strength 57 – 67 KSI Yield Strength 51 KSI (ref. only) Elongation (% in 2 in.) 30 % nom. (ref. only) Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Zn 30 Cu 70 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 0001 .008 ± 0008 .0015 ± 00015 .009 ± 0009 .002 ± 0002 .010 ± 001 .003 ± 0003 .012 ± 0012 .004 ± 0004 .015 ± 0015 .005 ± 0005 .020 ± 002 .006 ± 0006 .025 ± 0025 .007 ± 0007 .030 ± 0030 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1075 Scaleless Blue Tempered Spring Steel Shim Stock
1075 Scaleless Tempered Spring Steel is comprised of medium-high carbon which makes for better forming qualities than 1095 blue tempered. This Blue Tempered Spring Steel retains good forming properties. Typically used where the higher carbon content is not needed.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Coiled and flat mechanical springs
- Steel tapes
- Washers
- Clips
1074/1075 Scaleless Blue Tempered Spring Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened and Tempered Hardness RC 44/47 (ref. only) Specifications ASTM A 684
AMS 5122 per Chem.
MIL-S-7947 per Chem.Tensile Strength NA Yield Strength NA Elongation (% in 2 in.) NA Surface Finish Blue Polished RA (um) 15 RMS max. Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Upon Request Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.69 – 0.80 Mn 0.40 – 0.80 Fe 98.38 – 98.8 P 0.02 max S 0.025 max Si 0.15 – 0.30 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .025 ± 001 .032 ± 0015 .035 ± 002 .042 ± 002 .050 ± 002 .062 ± 002 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1095 Blue Tempered Spring Steel Shim Stock Product Guide
1095 Blue Tempered Spring Steel is an economical and thermally/electrically conductive material with high fatigue strength that is easily fabricated. Tempered spring steel is commonly referred to as high carbon steel and known for its high yield strength which allows objects made of spring steel to return to their original shape after bending and forming.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Coiled and flat mechanical springs
- Steel tapes.
- Washers
- Saw blades
- Clips
1095 Blue Tempered Spring Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened and Tempered Hardness RC 48/51 (ref. only) Specifications ASTM A 684
AMS 5122 per Chem.
MIL-S-7947 per Chem.Tensile Strength NA Yield Strength NA Elongation (% in 2 in.) NA Surface Finish Blue Polished RA (um) 15 RMS max. Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Upon Request Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.9 – 1.03 Mn 0.3 – 0.5 Fe 98.38 – 98.8 P 0.04 max S 0.05 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .002 ± 0002 .003 ± 0003 .004 ± 0003 .005 ± 0003 .006 ± 0004 .007 ± 0004 .008 ± 0005 .010 ± 0007 .012 ± 0008 .015 ± 0008 .020 ± 001 .025 ± 001 .030 ± 0015 .032 ± 0015 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
1008/1010 Full Hard Low Carbon Steel Shim Stock Product Guide
1008-1010 Full Hard Low Carbon Steel Shim Stock is an economical, thermally/electrically conductive material with high fatigue strength that is easily fabricated. This Low Carbon Cold Rolled Steel with a maximum carbon content up to 0.25% is an excellent low cost material to create shims for your specific application.
Custom material dimensions can be requested by clicking “Create Custom Quote” here. For “Fabrication Services” click here or above in the menu.
Market Applications
- Automobile and truck axle shims
- Tool and die alignment purposes
- Arbor spacers
- Support, leveling, fit adjustment
1008/1010 Full Hard Low Carbon Steel Shim Stock Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness 15T90 min. (ref. only) Specifications ASTM A 109 Tensile Strength 125 – 150 KSI (ref. only) Yield Strength 110 – 130 KSI (ref. only) Elongation (% in 2 in.) 1 – 3% (ref. only) Surface Finish 2BR or 2TR RA (um) 6 – 15 (ref. only) Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Upon Request Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Fe 99.34% Mn 0.50 % P 0.025 % S 0.025 % C 0.10 % max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
THICKNESS +/-Thickness Tolerance THICKNESS +/-Thickness Tolerance .001 ± 0001 .008 ± 00075 .0015 ± 00015 .009 ± 00075 .002 ± 0002 .010 ± 00075 .003 ± 0003 .012 ± 00075 .004 ± 0005 .015 ± 00075 .005 ± 0005 .020 ± 0010 .006 ± 0005 .025 ± 0010 .007 ± 00075 .031 ± 0015 STANDARD WIDTH TOLERANCES +/- .005”
This information above is for reference only and the true values/specifications will be seen on the individual material certifications
302/304 Stainless Steel Spring Wire Product Guide
302/304 Stainless Steel Spring Wire is a general purpose alloy used in high corrosion resistant applications. It is typically composed of 18% chromium and 8% nickel and provides excellent spring properties. AISI 302/304 spring wire can be used in high temperatures up to 550F and meets A-313.
Click “Request Quote” to request a quote for the thickness and weight of your bulk Music Wire material.
302/304 Stainless Steel Spring Wire Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Full Hard Hardness RC 35- RC 45 Specifications ASTM A-313 Min. Tensile Strength 185 KSI Min. Yield Strength 140 KSI Elongation (% in 2 in.) NA Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Mn 2 max C 0.15 max P 0.045 max S 0.03 max Si 0.75 max Cr 17 – 19 Ni 8 – 10 N 0.1 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Thickness Tolerances
Thickness +/- Thickness Tolerance .0005 ± 000025 .001 ± 00005 .0015 ± 00007 .002 ± 0001 .003 ± 00015 .004 ± 0002 .005 ± 00025 .006 ± 0003 .007 ± 00035 .008 ± 0004 .009 ± 00045 .010 ± 0005 .012 ± 0006 .015 ± 0009 .020 ± 0010 .025 ± 0010 .031 ± 0010 This information above is for reference only and the true values/specifications will be seen on the individual material certifications
Perfect Punch and Die Set Imperial/Metric Product Guide
Our newly designed and patented, Perfect Punch and Die Set comes from extensive surveys with Tool & Die Makers and Machinists who use this type of product. They suggested that the punching surface be enlarged to accommodate larger shims and gaskets. Also, they asked that the smaller, most used punches be at the front of the set to allow maximum use of the surface area. Our new design offers those changes as well as other distinct advantages over any other Punch & Die Set on the market.
Advantages:
Ready to Use Out of The Box – the accuracy you expect when purchasing a quality tool. No need to “size” each hole before using the TBI Perfect Punch & Die Set (Other sets require you to punch thru the plastic several times to align the holes. This process could crack the plastic before your set is ready to use). All of our sets are tested at the factory to insure perfect alignment.
25% Larger Surface Area – in fact our 4-3/8″ x 3″ surface allows you to punch a 1/4″ hole up to 3-3/8″ from the edge of a shim or gasket. All other sets are limited to less than 3/4″ from the edge for the same size hole!
More Stability – larger punches are located closer to the center of the die for greater stability when more force is needed to punch the larger holes.
Heavier Cast Acrylic Top – our plastic acrylic top is made from extra heavy cast acrylic material (25% thicker than any other punch & die set). This will ensure an accurate line for the punch and helps eliminate cracking and breakage.
Heavy Duty Carrying Case – protects your punches from nicks while keeping your set secure in this sturdy carrying case.
Trinity brand industries punch & die sets are offered in both English and Metric.
Perfect Punch and Die Set Technical Analysis
-
Imperial Mechanical and Physical Properties
Package Type Each Units Per Package 1 Shipping Weight 3 Pound Size Imperial
1/8 in
3/16 in
1/4 in
5/16 in
3/8 in
7/16 in
1/2 in
5/8 in
3/4 inMetric
3.5 mm
5.0 mm
7.0 mm
8.5 mm
10.0 mm
11.5 mm
13.5 mm
16.5 mm
19.5 mmPunch Pin Hardness RC 60-62 (ref. only) Punch Pin Material Drill Rod Die Base Material A-2 Tool Steel Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Metric Mechanical and Physical Properties
Package Type Each Units Per Package 1 Shipping Weight 3 Pound Size 10.0 m
11.5 m
13.5 m
16.5 m
19.5 m
3.5 m
5.0 m
7.0 m
8.5 mPunch Pin Hardness RC 60-62 (ref. only) Punch Pin Material Drill Rod Die Base Material A-2 Tool Steel Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage Mn 1 max C 0.95 – 1.05 P 0.03 max S 0.03 max Si 0.5 max Cr 4.75 – 5.5 Mo 0.9 – 1.4 V 0.15 – 0.5 Fe Balance This information above is for reference only and the true values/specifications will be seen on the individual material certifications
Carbon Spring Wire/Music Wire Product Guide
Carbon Spring Wire/ Music Wire is hard drawn, phosphate coated and meets ASTM A228. Due to its high tensile strength and ability to withstand high stresses, it is one of the most widely used materials to manufacture springs.
Click on “Request Quote” to request a quote for the thickness and weight of your bulk Music Wire material
Carbon Spring Wire/Music Wire Technical Analysis
-
Mechanical and Physical Properties
Temper Rating Hardened and Tempered Hardness RC 48/51 Specifications ASTM A-228 Tensile Strength NA Yield Strength NA Elongation (% in 2 in.) NA Surface Finish NA RA (um) NA Grain Size (RTF in mm) NA RoHS RoHS Compliant REACH REACH Compliant DFARS DFARS Compliant Country of Manufacture USA This information above is for reference only and the true values/specifications will be seen on the individual material certifications
-
Chemistry Information
Element Percentage C 0.9 – 1.03 Mn 0.3 – 0.5 Fe 98.38 – 98.8 P 0.04 max S 0.05 max This information above is for reference only and the true values/specifications will be seen on the individual material certifications